// Router Brand

Tenda Router Login

192.168.0.1

Tenda is a budget networking brand headquartered in Shenzhen, China, with a strong presence in developing markets across Asia, Africa, and South America. Tenda routers use 192.168.0.1 as the default gateway with tendawifi.com as the branded login URL. Factory credentials are admin/admin on most models. Tenda focuses on affordability without sacrificing essential features, making their routers popular in price-sensitive markets and as secondary access points.

Tenda routers use 192.168.0.1 as the default IP address. Open a browser and type that address or tendawifi.com in the address bar. You must be connected to the Tenda router’s network via Wi-Fi or Ethernet cable for the login page to load.

The login page varies by model and firmware version. Older Tenda routers show a traditional username and password form. Enter admin for both fields. Newer models display a single password field or jump straight to the setup wizard on first boot.

After logging in, the admin panel shows a simplified dashboard. Tenda’s interface is simple with fewer menus, which is easier for non-technical users but means advanced options like VLAN configuration are limited.

If the router has never been configured, the setup wizard appears automatically at 192.168.0.1.

Tenda Default Credentials by Model

Model	Default IP	Username	Password	Notes
AC1200 (AC5/AC6)	192.168.0.1	admin	admin	WiFi 5 dual-band, budget
AC2100 (AC21/AC23)	192.168.0.1	admin	admin	WiFi 5 dual-band, mid-range
F3	192.168.0.1	admin	admin	Single-band, very basic
MW5	192.168.0.1	admin	admin	Mesh WiFi 5, 2-pack
MW6	192.168.0.1	admin	admin	Mesh WiFi 5, whole-home
4G06	192.168.0.1	admin	admin	4G LTE with Ethernet
N301	192.168.0.1	admin	admin	Single-band, budget
TX9 Pro	192.168.0.1	admin	admin	WiFi 6, tri-band

Tenda keeps the same 192.168.0.1 gateway and admin/admin credentials across their entire product range. This consistency makes it straightforward to access any Tenda model if you know the pattern for one.

Setting Up a Tenda Router

Connect the WAN port to your modem with an Ethernet cable. Plug in the power adapter and wait 60 seconds for the LEDs to stabilize.

Connect to the default Wi-Fi network printed on the bottom label, formatted as Tenda_XXXXXX. Most Tenda routers ship with an open network on first boot.

Open a browser and go to 192.168.0.1 or tendawifi.com. The setup wizard loads automatically.

Step 1: The wizard detects your internet connection type. For most home connections, it selects Dynamic IP (DHCP) automatically. If your ISP requires PPPoE, enter the username and password from your ISP.

Step 2: Set your Wi-Fi network name and password. Tenda routers default to combining 2.4 GHz and 5 GHz into a single SSID with automatic band steering. You can separate them later in Wi-Fi settings if you prefer manual control.

Step 3: On models that support it, set the admin password. Some Tenda models tie the admin password to the Wi-Fi password by default, meaning they share the same credentials. Consider setting a separate admin password for better security.

Step 4: Click Done or Apply. The router saves the configuration and restarts Wi-Fi. Reconnect using your new SSID and password.

Changing Your Tenda Wi-Fi Password

Log into your Tenda router at 192.168.0.1 or tendawifi.com. Go to Wi-Fi Settings in the left sidebar or top menu, depending on your firmware version.

You will see fields for the SSID and password for each band. Enter a new password with at least 8 characters mixing letters, numbers, and symbols. Select WPA2-PSK as the encryption type.

Click OK or Apply. The router restarts its wireless radios and disconnects all clients. Reconnect with the new password. For a detailed guide, see the change Wi-Fi password guide.

The Tenda WiFi app also lets you update the password directly from your phone.

Tenda Mesh WiFi Setup (MW Series)

The Tenda MW5 and MW6 mesh systems provide whole-home coverage using multiple identical units. One unit acts as the primary router connected to your modem. The remaining units function as satellites.

Set up the primary unit first. Connect it to your modem, power it on, and complete the setup wizard at 192.168.0.1. Once the primary unit is online and working, plug in the satellite units one at a time.

Each satellite unit powers on and automatically discovers the primary unit. The LED indicator on the satellite turns solid green when it has successfully paired. If the LED stays red or flashing, move the satellite closer to the primary unit and power cycle it.

The mesh network uses a single SSID. Devices roam between nodes as you move through your home. Tenda mesh systems support both wireless and wired backhaul. For better performance between floors, connect satellites to the primary unit via Ethernet cables through the LAN ports.

Manage all mesh nodes from the primary unit’s admin panel under Mesh Network, or through the Tenda WiFi app.

Cannot reach 192.168.0.1 or tendawifi.com. Confirm you are connected to the Tenda router’s network and not your phone’s mobile data or another nearby network. Open a command prompt and verify your default gateway is 192.168.0.1. If tendawifi.com does not load, use the IP address directly. DNS-based aliases depend on the router handling DNS queries, which breaks if you have configured third-party DNS servers.
Admin password rejected. If admin/admin does not work, the password was changed during setup. On models that sync the admin and Wi-Fi passwords, try your Wi-Fi password. If you cannot remember either, perform a factory reset by holding the reset button for 10 seconds.
Internet connected but no Wi-Fi. Check the Wi-Fi LED on the router. If it is off, the wireless radio may be disabled. Log in via Ethernet at 192.168.0.1 and go to Wi-Fi Settings to enable the radios. Some Tenda models have a physical Wi-Fi on/off button on the side.
Firmware update fails. Download the correct firmware from the Tenda support website for your exact model. Upload it through System Settings > Firmware Upgrade. Keep the router powered on during the update. A failed firmware flash can brick the device.

// FAQ

Tenda Router FAQ

What is the default IP address for Tenda routers?

Tenda routers use 192.168.0.1 as the default gateway. You can also access the admin panel by typing tendawifi.com in your browser's address bar. Both addresses reach the same management interface as long as you are connected to the Tenda router's network.

What is the default Tenda router password?

Most Tenda routers use admin for both the username and password. Some newer models prompt you to create a password during first setup instead. If admin/admin does not work and you did not change it, check the label on the bottom of your router for model-specific credentials.

How do I access tendawifi.com?

Connect to your Tenda router via Wi-Fi or Ethernet cable. Open a browser and type tendawifi.com in the address bar. This is a local DNS alias that resolves to 192.168.0.1 on the Tenda router. If the page does not load, type 192.168.0.1 directly. DNS aliases can fail if you have manually changed your DNS servers.

How do I reset a Tenda router to factory settings?

Find the reset button on the back of the router. It is usually a small pinhole. Press and hold with a paperclip or pin for 8-10 seconds until all LEDs blink simultaneously. Release the button and wait 1-2 minutes for the router to reboot. All settings return to factory defaults.

Does Tenda have a mobile app for router management?

Yes. The Tenda WiFi app (iOS and Android) lets you manage basic settings including Wi-Fi name and password, connected device management, parental controls, and firmware updates. Advanced settings like port forwarding and static routing are only available through the web interface at 192.168.0.1.

Which Tenda router models are most popular?

The AC1200 (WiFi 5, budget dual-band), AC2100 (WiFi 5, mid-range), MW5 and MW6 (mesh system), F3 (single-band budget), and 4G06 (4G LTE router) are the most widely sold models. The AC series and MW mesh systems offer strong value at their price points.