Smart Bro Router Login
192.168.1.1
Smart Bro is the consumer wireless broadband brand under Smart Communications Inc., a subsidiary of PLDT Inc. It offers 4G and 5G home WiFi through prepaid and postpaid plans using Huawei and ZTE CPE devices. Most Smart Bro routers use 192.168.1.1 as the default gateway.
How to Login to Your Smart Bro Router
Smart Communications Inc. is a subsidiary of PLDT Inc., the largest telecommunications company in the Philippines. Smart Bro is the consumer wireless broadband brand offering 4G LTE and 5G home WiFi on prepaid and postpaid plans.
To access the admin panel, connect to the Smart Bro WiFi network. Open a browser and type 192.168.1.1 in the address bar. Enter admin as the username and admin as the password. Some Huawei models require the password printed on the router sticker.
If the page does not load, confirm you are on the Smart Bro network and not mobile data. Type http://192.168.1.1 with the http prefix. The SmartBro mobile app also provides basic management including data balance and connected device monitoring.
Smart Bro Router Models
The hardware comes from Huawei and ZTE, branded with Smart Bro labels.
| Router Model | Type | Default IP | Username | Password |
|---|---|---|---|---|
| Smart Bro Pocket WiFi (Huawei E5577) | Portable 4G | 192.168.8.1 | admin | admin |
| Smart Bro Home WiFi (Huawei B312) | Fixed 4G | 192.168.1.1 | admin | admin |
| Smart Bro Rocket WiFi (ZTE MF293N) | Fixed 4G | 192.168.1.1 | admin | admin |
| Smart Bro 5G Home WiFi (Huawei 5G CPE) | Fixed 5G | 192.168.1.1 | admin | On label |
| Smart Bro Prepaid LTE Home WiFi | Fixed 4G | 192.168.1.1 | admin | admin |
The Pocket WiFi models use 192.168.8.1 instead of 192.168.1.1. This is the standard Huawei mobile hotspot address. All fixed home WiFi devices use 192.168.1.1.
Older Smart Bro devices running on 3G have been phased out as Smart shut down its 3G network. If you have an older device, check with Smart for a replacement unit.
Changing Your Smart Bro WiFi Password
The default WiFi password on Smart Bro routers is printed on the device label. It is often a short numeric string that is easy to guess. Change it after setup.
Log in at 192.168.1.1. Go to WiFi Settings or WLAN in the menu. The exact location depends on the router model.
On Huawei models, look for WLAN Basic Settings. Find the WPA Pre-Shared Key field. Delete the current password and type your new one. Use at least 12 characters with a mix of letters, numbers, and symbols.
On ZTE models, go to WiFi and then WiFi Security Settings. Change the Passphrase field.
Click Apply or Save. All connected devices will disconnect and need to reconnect using the new password. Our WiFi password change guide has step-by-step instructions for more router brands.
Prepaid vs Postpaid Plans
Smart Bro offers both prepaid and postpaid home WiFi options. The hardware is the same, but billing and data management differ.
Prepaid. Buy a Smart Bro Home WiFi device from any Smart store. Load credits through the SmartBro app, GCash, or retail load. Register to a data promo by texting a keyword to 9999. Popular promos include GIGA99 (2 GB for 7 days) and GIGA299 (8 GB for 30 days). When data runs out, the connection stops until you register again.
Postpaid. Apply through a Smart store or the Smart website. Plans include a monthly data allocation and a locked router. Postpaid offers higher data caps and unli data on select tiers.
Prepaid is more popular because it requires no credit check, no monthly commitment, and no installation appointment.
Troubleshooting Smart Bro Issues
-
Admin page does not load at 192.168.1.1. Make sure you are on the Smart Bro WiFi network, not mobile data. Try
http://192.168.1.1with the prefix. If you have a Pocket WiFi model, the admin page is at 192.168.8.1 instead. Reset the router if nothing works. -
Wrong password on login page. Smart Bro fixed WiFi devices default to admin/admin. If someone changed the password, hold the reset button on the device for 15 seconds. This restores factory defaults including the original admin credentials and WiFi password.
-
No internet connection after loading. Check your data balance through the SmartBro app or by dialing *123#. Prepaid users need an active data promo. If you have data remaining, restart the router by unplugging it for 30 seconds. Move the device closer to a window for better LTE signal.
-
Slow internet speeds. Smart Bro speeds depend on 4G/5G signal strength. Place the router near a window on an upper floor. Avoid thick walls and metal surfaces. If speeds remain slow, the cell tower may be congested during peak hours.
-
Cannot connect to WiFi network. Verify the SSID is broadcasting by logging in at 192.168.1.1 and checking WiFi is enabled. If the router recently reset, the SSID reverts to the default on the label.
Smart Bro Router FAQ
What is the default IP address for Smart Bro router?
Smart Bro routers use 192.168.1.1 as the default gateway IP address. Connect to your Smart Bro WiFi network and type this address in your browser to access the admin panel.
What is the default password for Smart Bro router?
Most Smart Bro routers use admin as both the username and password. Some Huawei models use admin as the username and the password printed on the router label. Check the sticker on the bottom of your device for model-specific credentials.
How do I change my Smart Bro WiFi password?
Log in at 192.168.1.1 with admin/admin. Go to WiFi Settings or WLAN. Find the WPA Pre-Shared Key or WiFi Password field. Type your new password and click Apply. All connected devices will need to reconnect with the new password.
Can I use Smart Bro SIM in a different router?
Yes. Smart Bro SIM cards work in unlocked 4G/5G routers from other brands. Insert the SIM, set the APN to internet, and the connection should work. Locked Smart-branded devices only accept Smart SIM cards.
How do I check my Smart Bro data balance?
Dial *123# on a phone with the Smart Bro SIM inserted, or open the SmartBro app. You can also log in to the router admin panel at 192.168.1.1 to view connection status and data usage on some models.