Digi Router Login
192.168.8.1
Digi merged with Celcom in 2022 to form CelcomDigi, but many users still have Digi-branded equipment. Digi fibre routers use 192.168.0.1, while Digi 4G/5G hotspot devices from Huawei typically use 192.168.8.1. This guide covers login and setup for all Digi router models.
Digi Is Now CelcomDigi
Digi, now part of CelcomDigi Berhad, completed its merger with Celcom in 2022. All broadband services now operate under the CelcomDigi brand. If you’re signing up for a new plan, head to the CelcomDigi website.
For the full CelcomDigi router login guide, setup instructions, and 4G/5G CPE troubleshooting, see our CelcomDigi page, which covers both legacy Digi and Celcom equipment.
If you still have Digi-branded equipment from before the merger, this page covers your specific hardware.
Logging Into Your Digi Router
Digi routers use the IP address 192.168.0.1 for fibre models, or 192.168.8.1 for 4G/5G CPE devices. Here’s the breakdown by device type.
Digi fibre router (ZTE or D-Link): Connect to your Digi Wi-Fi network or plug a cable into a LAN port. Open a browser and type 192.168.0.1. Enter admin / admin to log in.
Digi 4G mobile hotspot (Huawei E5577, E5785): Connect to the hotspot Wi-Fi. Go to 192.168.8.1 in your browser. The username is admin and the password is printed on the device label (or admin if it hasn’t been changed).
Digi 4G CPE (Huawei B315, B535): Same as above: connect via Wi-Fi or a cable plugged into the WAN/LAN port, go to the IP address shown on your device label, and log in. These desktop CPE units have ethernet ports, so a wired connection is more reliable for admin access.
Digi Router Models and Default Credentials
| Device Model | Type | Default IP | Username | Password |
|---|---|---|---|---|
| ZTE F670L | Fibre ONT+Router | 192.168.0.1 | admin | admin |
| D-Link DIR-842 | Fibre Router | 192.168.0.1 | admin | (blank) |
| Huawei E5577 | 4G Mobile Hotspot | 192.168.8.1 | admin | See label |
| Huawei E5785 | 4G+ Mobile Hotspot | 192.168.8.1 | admin | See label |
| Huawei B315 | 4G LTE CPE | 192.168.8.1 | admin | admin |
| Huawei B535-232 | 4G LTE CPE | 192.168.8.1 | admin | See label |
The Huawei E5577 was the standard Digi portable hotspot for years. Battery-powered, pocket-sized, decent for one or two devices. The B535 is the home CPE option: larger, plugs into a wall socket, and supports more simultaneous connections.
Changing Wi-Fi Password on Digi Devices
Digi device password changes follow the same steps as other CelcomDigi equipment.
On Huawei mobile hotspots (E5577/E5785):
Log in at 192.168.8.1. Tap Settings > Wi-Fi Settings > Wi-Fi Basic Settings. Change the Wi-Fi Key field to your new password. Hit Apply.
You can also manage these through the Huawei HiLink app on your phone. Open the app, tap the connected device, go to My Wi-Fi, and change the password there. Faster than using the browser.
On ZTE/D-Link fibre routers:
Same process as any router: log in at 192.168.0.1, go to Wireless Settings, change the security key. See our change Wi-Fi password guide for detailed steps.
Troubleshooting Digi Connection Issues
Here are the most common Digi router problems and how to fix them.
-
Login page does not load. Make sure you are connected to the Digi hotspot Wi-Fi, not your home Wi-Fi or mobile data. On phones, disable mobile data temporarily so the browser routes through the hotspot connection. Type http://192.168.8.1 with the full prefix.
-
Hotspot battery drains fast. The E5577 battery degrades after 2-3 years. If your hotspot dies within an hour, the battery needs replacement. Third-party batteries are available on Shopee for RM20-40. Model number is HB824666RBC for the E5577.
-
Slow 4G speeds. Position the CPE near a window. For portable hotspots, try different spots in your room. Check the signal indicator. Two bars or fewer means you are too far from the tower. Consider an external antenna for CPE models with SMA ports. Digi’s 4G network primarily operates on Band 3 (1800 MHz) and Band 7 (2600 MHz), with Band 1 (2100 MHz) for additional capacity. If your CPE supports band locking, try forcing Band 3 for the best balance of range and speed.
-
No internet after SIM swap or top-up. Restart the device after inserting a new SIM or reloading prepaid credit. Some Digi prepaid SIMs require an APN of “diginet”, so check Settings > Network > APN in the admin panel at 192.168.8.1 and confirm the APN is correct.
-
Account or billing issues. Digi customer support is now handled by CelcomDigi. Call 1111 or visit a CelcomDigi store. Your old Digi account number still works for identification.
Before subscribing to any Digi or CelcomDigi plan, check coverage at digi.com.my/coverage to verify 4G or 5G availability at your address. Coverage varies significantly between urban and rural areas in Malaysia.
Digi Router FAQ
What is the default IP for Digi router?
Digi fibre routers use 192.168.0.1. Digi 4G/5G mobile hotspots and CPE devices from Huawei use 192.168.8.1. Check the sticker on your device if neither works.
Is Digi still operating as a separate ISP?
No. Digi and Celcom completed their merger in 2022 and now operate as CelcomDigi. Existing Digi broadband plans continue to work, but new plans are under the CelcomDigi brand. Customer support is now through CelcomDigi at 1111.
What is the default password for Digi router?
Most Digi-branded routers use admin/admin. Huawei mobile hotspots like the E5577 use admin as the username, with the password printed on the device label or set to admin by default.
How do I access my Digi mobile hotspot settings?
Connect to the hotspot Wi-Fi. Open a browser and go to 192.168.8.1. Log in with admin and the password on the device label. From there you can change Wi-Fi name, password, and view data usage.
Can I still get support for my Digi router?
Yes. CelcomDigi continues to support all legacy Digi equipment and plans. Call 1111 or visit any CelcomDigi store for assistance with your Digi router or broadband plan.