192.168.1.4
192.168.1.4 Router Admin Login
Commonly assigned by DHCP to devices on a 192.168.1.x local network.
If you spotted 192.168.1.4 in your network settings and wondered whether it leads to your router, the answer is no. 192.168.1.4 is a private IP address typically assigned to a device on your local network by your router’s DHCP server. This is NOT your router’s admin address.
What This Address Means
Every device connected to your home network receives a unique IP address so the router can direct traffic correctly. Think of it as a mailing address inside your house. The router is the front door at 192.168.1.1, and each room (device) has a number: .2, .3, .4, and so on.
The number .4 means three other devices already held addresses when yours connected. The DHCP server on your router assigned the next open slot. This assignment is temporary. DHCP leases last a fixed period (commonly 24 hours), and the address may shift if the device disconnects and reconnects later.
How to Find Your Actual Router
To access the admin panel where you can change Wi-Fi passwords or configure port forwarding, you need the default gateway, not your device address.
Windows. Open Command Prompt and run ipconfig. Scroll to your active adapter and read the Default Gateway line. It will show 192.168.1.1 on most home setups.
macOS. Go to System Settings, then Network. Select Wi-Fi and click Details. The Router entry is your gateway.
Linux. Open a terminal and type ip route. The address after “default via” is your router.
Once you have the gateway IP address, type it into any browser to reach the router login page.
Common Devices at This Address
A smart TV is a common occupant of addresses like .4. Many televisions stay connected to Wi-Fi at all times and renew their DHCP lease quietly in the background. Gaming consoles that remain in standby mode also hold low addresses because they maintain their network connection even when the screen is off.
In smaller households with fewer devices, .4 might belong to a secondary laptop or a tablet used by a family member. The assignment depends entirely on connection order, not on device type or importance.
Troubleshooting
Browser shows an error when you type 192.168.1.4. Expected behavior. This IP address belongs to a device, not a web server. Unless the device at .4 is running a service (like a smart TV with a web interface), nothing will load. Your router login is at the default gateway address.
Your device at 192.168.1.4 is unreachable from other devices. Check that both devices are on the same subnet (both should have 192.168.1.x addresses). Firewalls on the target device may block incoming connections. On Windows, ensure Network Discovery is turned on if you want to share files.
You received a “duplicate IP address” warning. Another device on the network has been manually set to 192.168.1.4, creating a conflict. Release and renew your DHCP lease. On Windows, run ipconfig /release followed by ipconfig /renew in Command Prompt.
Frequently Asked Questions
Is 192.168.1.4 my router?
No. 192.168.1.4 is assigned to a device such as a computer, tablet, or smart TV. The router uses 192.168.1.1 on most home networks. Check the Default Gateway field in your network settings to confirm your router address.
What does 192.168.1.4 mean in ipconfig?
In ipconfig output, this address appears next to IPv4 Address, which identifies your computer on the local network. It means the router's DHCP server gave your machine the fourth address in the 192.168.1.x subnet.
Why did my device get 192.168.1.4 specifically?
DHCP assigns addresses sequentially from the available pool. Addresses .1 through .3 were already claimed by the router and other devices. Your device connected next and received .4. The specific number has no special significance.
How do I give a device a permanent IP address?
Log into your router at the default gateway and find DHCP reservation settings. Enter the device MAC address and assign 192.168.1.4 or any preferred address. This prevents the address from changing after a lease expiration.